![Valve Bag Filling System for Portland Cement [Model 830]](https://www.choicebagging.com/wp-content/uploads/2021/09/cbe-Montreal-cement-Model730-1.png)
by Choice Bagging | Sep 6, 2021 | Building Materials, Case Studies, Valve Bag Fillers
A contract packager of blended cement and concrete mixes in western Arkansas was seeking to install a bagging system to bag Portland cement into 94 Lb. valve bags at a rate of 600 bags per hour (56,400 Lbs. / Hrs. or 25,636 KG). The client was looking for a system...
![Valve Bag Filling System for Mortar Mixes [Model 730]](https://www.choicebagging.com/wp-content/uploads/2021/09/mortor-983x675.jpg)
by Choice Bagging | Sep 6, 2021 | Building Materials, Case Studies, Valve Bag Fillers
A manufacturer of concrete and mortar mixes in central Florida was looking to replace a set of existing worn-out air packers to fill 80 lb. of pre-mixed concrete. The old machines had become increasingly unreliable and susceptible to unexpected downtime and...
![Valve Bag Filling System for Fly Ash [Model 830]](https://www.choicebagging.com/wp-content/uploads/2021/09/Model-830-Vertical-Impeller-Packer-9.jpg)
by Choice Bagging | Sep 6, 2021 | Building Materials, Case Studies, Valve Bag Fillers
A fly ash producer in central Texas contacted CBE with a big problem. Their remotely located corporate office had purchased an auger packer from a low-cost equipment producer that did not provide proper guidance as to whether the machine was a good fit for the...
by Choice Bagging | Sep 5, 2021 | Building Materials, Bulk Bag Fillers, Case Studies
Many cement plant operators turn to us because they’re experiencing difficulty achieving high weight accuracy and high throughput for bulk bag filling. The complaint is the same: The bag filler isn’t doing the job. In these cases, the first question I ask has...
![Bulk Bag Filling System for Flyash [Model 520]](https://www.choicebagging.com/wp-content/uploads/2021/09/Model-520-Bulk-Bag-Filler-1.jpg)
by Choice Bagging | Sep 5, 2021 | Building Materials, Case Studies
A producer of Flyash in northwestern Montana was seeking an automated bulk bag filling system to fill one-ton bags at a rate of up to 20 bags per hour. The system needed to be capable of filling Flyash from a supply into both bulk bags and bulk trucks. The...
Recent Comments